TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 174 of 620

TM 9-2520-272-40
0023
3. Turn right brake support assembly (Figure 7, Item 8) over so that the outside of the support assembly points up.
Put assembly on wooden blocks (Figure 7, Item 14).
4. Install one 5/16-18 x 2 inch bolt (Figure 7, Item 17) and one washer (Figure 7, Item 18).
5. Install two 5/16-18 x 1 inch bolts (Figure 7, Item 15) and two washers (Figure 7, Item 16).
6. Torque three bolts (Figure 7, Item 15) and (Figure 7, Item 16) to 17 to 20 lb-ft (23 to 27 N·m).
7. Turn right brake support assembly (Figure 7, Item 8) over so that the inside of the support assembly points up.
Put assembly on wooden blocks (Figure 7, Item 14).


Back to Top