TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 173 of 620
TM 9-2520-272-40
0023
INSTALL RIGHT BRAKE SUPPORT ASSEMBLY
NOTE
Turn right brake support assembly so that the inside of the support assembly points up.
1. Install the stationary cam (Figure 6, Item 19) on two dowel pins (Figure 6, Item 20) in right brake support
assembly (Figure 6, Item 8).
2. Lightly tap down the stationary cam (Figure 6, Item 19) onto the dowel pins (Figure 6, Item 20) until the
stationary cam is installed.
Back to Top
