TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 169 of 620

TM 9-2520-272-40

0023

6. Place right brake support assembly (Figure 2, Item 8) on two wooden blocks with outside of support assembly

pointed up.

7. Unscrew two bolts (Figure 2, Item 10) until bolt heads are approximately 0.25 in. (6.35 mm) above surface

of right brake support assembly (Figure 2, Item 8).

8. Tap down bolt heads (Figure 2, Item 10) to touch surface of right brake support assembly (Figure 2, Item 8).

9. Remove two bolts (Figure 2, Item 10), using 7/16 inch socket, and two washers (Figure 2, Item 11) from right

brake support assembly (Figure 2, Item 8).