TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 162 of 620

TM 9-2520-272-40

0021

8. Turn the left brake apply shaft (Figure 7, Item 1) to the left or right while you insert it. Carefully push the shaft

into the bore until the left brake apply shaft is installed in the right cover assembly (Figure 7, Item 5).

NOTE

When you turn over the right cover, hold the left brake apply shaft in position to keep it from

falling out.

9. Hold the left brake apply shaft (Figure 7, Item 1) in position and turn the right cover assembly (Figure 7, Item 5)

over so that the external side points up. Put a wooden block under the right cover assembly so that it holds

up the left brake apply shaft.

10.Remove the protective tape from the end of the left brake apply shaft (Figure 7, Item 1) and the right brake

apply cam shaft (Figure 7, Item 4).