TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 181 of 620
TM 9-2520-272-40
0024
SUSTAINMENT MAINTENANCE
REPAIR RIGHT BRAKE SUPPORT ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
Adapter, Socket Wrench Drive, 3/8” Male x 1/2”
Female (WP 0079, Item 2)
Chisel, Cold, 3/8”, Flat (WP 0079, Item 7)
Die and Tap Set, Rethreading (WP 0079, Item 12)
Gage, Vernier Caliper, 0-6” (WP 0079, Item 18)
Heater, Gun-Type, Electric (WP 0079, Item 20)
Press, Arbor, Hand, 25 Ton (WP 0079, Item 28)
Sander/Grinder, 4-1/2” (WP 0079, Item 31)
Slide Hammer Puller (WP 0079, Item 34)
Tap, 3/8 X 16 NC Rethread (WP 0079, Item 42)
Tap, 1/2 X 13 NC Rethread (WP 0079, Item 43)
Tap Wrench, Adjustable, 0-1/2” (WP 0079, Item 44)
Tool Kit, General Mechanic’s (GMTK) (WP 0079,
Item 45)
Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft
(WP 0079, Item 51)
Materials/Parts
Block, Wood, Lumber, Soft Wood (WP 0078, Item 3)
(2 - 16 in. lengths)
Carbon Dioxide, Technical (Dry Ice) (WP 0078, Item
4)
Cloth, Abrasive, Crocus (WP 0078, Item 6)
Gloves, Leather (WP 0078, Item 8)
Sealant, Lubricating, Thread-Locking (WP 0078,
Item 15)
Personnel Required
Track Vehicle Repairer, 91H10
Equipment Condition
Transmission removed from vehicle or container (TM
9-2350-277-13&P)
Oil f ll tube assembly removed (WP 0006)
Right brake support assembly removed (WP 0023)
0024
‐
1
Back to Top
