TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 190 of 620
TM 9-2520-272-40
0024
26.Turn the right brake support assembly (Figure 9, Item 6) over so that the external side points up.
27.Install the needle bearing (Figure 9, Item 9) with the driver against the numbered end of the bearing case.
Push the needle bearing to 0.060 to 0.070 in. (1.52 to 1.78 mm) below the surface of the right brake support
assembly (Figure 9, Item 6).
WARNING
Back to Top
