TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 192 of 620

TM 9-2520-272-40

0025

REMOVE BRAKE APPLY CAM, BRAKE ADJUSTING LINKS, AND RIGHT BRAKE ASSEMBLY

NOTE

Right cover assembly on work table is turned inside up.

Brake apply (rotating) cam, eight balls, and brake adjusting linkage may come out with right

brake support assembly, or these parts may stay with the right cover assembly.

External seal rings (inner and outer) may come out attached to the stationary cam, or they

may stay in the brake apply cam.

Procedures in this task are based upon above components staying with right cover assembly.

1. Remove brake apply cam (Figure 1, Item 4), eight balls (Figure 1, Item 3), and brake adjusting linkage (Figure

1, Item 1) from right cover assembly (Figure 1, Item 2). Put balls (Figure 1, Item 3) in a container.