TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 186 of 620
TM 9-2520-272-40
0024
14.Cut two slots 180 degrees apart at the base of the bearing race (Figure 5, Item 8) as shown in Figure 4. Cut
the slots deep enough to catch the end of the chisel but not deep enough to cut into the right brake support
assembly (Figure 5, Item 6).
WARNING
Back to Top
