TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 193 of 620

TM 9-2520-272-40

0025

2. Remove seals (Figure 2, Item 5) and (Figure 2, Item 6) from brake apply cam (Figure 2, Item 4). Discard seals

(Figure 2, Item 5) and (Figure 2, Item 6).

3. Remove O-rings (Figure 2, Item 9) and (Figure 2, Item 10) from face of brake apply cam (Figure 2, Item 4).

Discard O-rings (Figure 2, Item 9) and (Figure 2, Item 10).

4. Remove bolt (Figure 2, Item 11) and two spring tension clips (Figure 2, Item 12) from brake apply cam (Figure

2, Item 4).

5. Remove brake adjusting linkage (Figure 2, Item 1) from brake apply cam (Figure 2, Item 4).

6. Turn and remove inner brake adjusting link (Figure 2, Item 7) from outer brake adjusting link (Figure 2, Item 8).