TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 198 of 620

TM 9-2520-272-40

0025

20.Remove brake coolant seal ring (Figure 7, Item 26) from brake clutch backing plate (Figure 7, Item 28). Discard

seal (Figure 7, Item 26).

21.Remove four bolts (Figure 7, Item 30) and four washers (Figure 7, Item 29) from brake clutch backing plate

(Figure 7, Item 28).

NOTE

Brake clutch backing plate may catch on two brake reaction pins during removal. Tap brake

clutch backing plate near pin to help release brake clutch backing plate.

Six spring guide pins may come out with brake clutch backing plate, or pins may stay in right

cover assembly.

22.Remove brake clutch backing plate (Figure 7, Item 28) using two pry bars (Figure 7, Item 27) under inside edge

of brake clutch backing plate.

23.Remove six spring guide pins (Figure 7, Item 16) and (Figure 8, Item 16) from brake clutch backing plate

(Figure 7, Item 28) or from right cover assembly (Figure 7, Item 2) and (Figure 8, Item 2).