TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 207 of 620

TM 9-2520-272-40

0025

8. Position right brake support assembly (Figure 18, Item 42), inside surface up, on wooden blocks (Figure

18, Item 46).

9. Install eight balls (Figure 18, Item 3) in lowest areas of ramps on stationary cam (Figure 18, Item 43).

10.Apply petrolatum on eight balls (Figure 18, Item 3) and in ramps around balls.

11. Apply petrolatum on beveled thrust washer (Figure 18, Item 44) and install thrust washer (Figure 18, Item 44)

on right brake support assembly (Figure 18, Item 42) over needle bearing (Figure 18, Item 45).

12.Apply lubricating oil to needle bearing (Figure 18, Item 45) and run f nger over needle bearing until all rollers

are wet.