TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 215 of 620
TM 9-2520-272-40
0026
9. Remove brake apply cam shaft (Figure 3, Item 4) from vise.
10.Install spring (Figure 3, Item 6) on brake apply cam shaft (Figure 3, Item 4) with curved end of spring on f rst.
11. Install curved end of spring (Figure 3, Item 6) in cam arm (Figure 3, Item 12).
12.Install retaining ring (Figure 3, Item 5) on brake apply cam shaft (Figure 3, Item 4) to hold spring (Figure 3,
Item 6) in position.
Back to Top
