TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 223 of 620

TM 9-2520-272-40

0027

3. Install bronze thrust washer (Figure 4, Item 9) in top center recess in steer idler gear (Figure 4, Item 10)

and (Figure 5, Item 10).

NOTE

Bolt hole and pin hole in steer idler retainer plate are off center. Turn plate to seat pin in pin

hole before installing bolt.

4. Install steer idler retainer plate (Figure 4, Item 8) and (Figure 5, Item 8) on boss (Figure 4, Item 12) in center of

steer idler gear (Figure 4, Item 10) and (Figure 5, Item 10).

5. Install bolt (Figure 5, Item 7) in steer idler retainer plate (Figure 4, Item 8) and (Figure 5, Item 8).

6

. Torquebo

l

t(F

igure5

,I

tem7)to36to43lb-

f

t(49to58N·m)

.