TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 224 of 620
TM 9-2520-272-40
0027
NOTE
Do Step 7 and Step 8 only if the bearing was removed.
7. Apply petrolatum and lubricating oil to bearing (Figure 6, Item 3) journal located on underside of range steer
gear (Figure 6, Item 2).
8. Install new bearing (Figure 6, Item 3) on range steer gear (Figure 6, Item 2). Push bearing to shoulder.
9. Apply lubricating oil to bearing (Figure 6, Item 3).
10.Install range steer gear (Figure 6, Item 2) in right cover assembly (Figure 6, Item 4) with bearing (Figure 6, Item
3) in bearing race (Figure 6, Item 14).
NOTE
Do Step 11 and Step 12 only if the bearing was removed.
11. Apply petrolatum and lubricating oil to bearing (Figure 6, Item 6) journal located on underside of right steer
driven gear (Figure 6, Item 1).
12.Install new bearing (Figure 6, Item 6) on right steer driven gear (Figure 6, Item 1). Push bearing to shoulder.
13.Apply lubricating oil to bearing (Figure 6, Item 6).
14.Install right steer driven gear (Figure 6, Item 1) on right output shaft (Figure 6, Item 5), bearing (Figure
6, Item 6) down.
Back to Top
