TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 279 of 620

TM 9-2520-272-40

0035

6. Remove two packings (Figure 3, Item 6) from the left output shaft (Figure 3, Item 2). Discard two packings

(Figure 3, Item 6).

NOTE

Do Step 7 only if the retaining bearing assembly and sleeve are to be replaced.

When the bearing is removed from the left output shaft, the sleeve is pushed off in front

of the bearing.

7. Remove the retaining bearing assembly (Figure 3, Item 4) and sleeve (Figure 3, Item 5) from the left output

shaft (Figure 3, Item 2).

8. Remove packing (Figure 3, Item 7) from the end of the left output shaft (Figure 3, Item 2). Discard packing

(Figure 3, Item 7).