TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 292 of 620
TM 9-2520-272-40
0037
CAUTION
Be careful not to cut into gear hub when cutting slots in bearing race.
3. Cut two slots 180 degrees apart at base of inner bearing race (Figure 2, Item 5). Cut slots deep enough to
catch the lip of the pry bar, but not deep enough to cut through bearing race into gear hub.
WARNING
Back to Top
