TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 300 of 620

TM 9-2520-272-40
0038
INSTALL BEVEL GEAR DRIVEN SHAFT
CAUTION
Left cover assembly can be damaged if incorrect bevel gear driven gear shaft is installed. Make
sure part identif cation and length of shaft is correct before installation.
P/N
Length
29533537
10.65 in. (270.51 mm), used with rear carrier assembly P/N 29533535
1. Install bevel gear driven shaft (Figure 3, Item 1) in center housing assembly (Figure 3, Item 7), top or bottom
end of shaft f rst.


Back to Top