TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 88 of 620
TM 9-2520-272-40
0012
REMOVE PRIORITY VALVE ASSEMBLY
NOTE
Wiring harness does not have to be removed to remove priority valve assembly.
Transmission is upright on foororworktab
le
.
1. Remove two 1/4-18 x 2-1/8 inch bolts (Figure 1, Item 1) and two washers (Figure 1, Item 2) that attach priority
valve assembly (Figure 1, Item 5) to separator plate (Figure 1, Item 4).
2. Remove 1/4-18 x 1-3/4 inch bolt (Figure 1, Item 3) and washer (Figure 1, Item 2) that attach priority valve
assembly (Figure 1, Item 5) to separator plate (Figure 1, Item 4).
3. Remove priority valve assembly (Figure 1, Item 5).
Back to Top
