TM-9-2540-207-14-P
HEATER, VEHICULAR COMPARTMENT, MODEL: A20
TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2007
TM-9-2540-207-14-P - Page 111 of 288
TM 9-2540-207-14&P
5-67
/ 5-68 blank
5.8.4
Vent Outlet Seal (Applies to all Design Iterations)
Figure 5.8-6 Vent Outlet Seal
Note: The Vent Outlet Seal MUST be replaced EVERY time the heater is re-
installed into a vent ducting system.
5.8.4.1 Removal
1.
Pull Vent Outlet Seal from Vent Outlet End of heater.
5.8.4.2 Installation
1.
Position new Vent Outlet Seal over Vent Outlet end of heater so the foam side is out,
and positioning notches on sides line up with notches in Vent Sensor.
2.
Press Vent Outlet Seal over end of heater until the seal stops against the ends of the
Top and Bottom Shells.
Back to Top
