TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 110 of 779

1. Turn engine using splined wrench -5120-793-7895 as

shown in figure 4-51 until one pair of bolts (A) on the

diaphragm coupler is exposed for removal.

2. Remove two bolts and lock washers. Turn engine until

remaining pair of bolts are accessible and remove them.

Figure 4-54. Removing fuel injection pum p

diaphragm coupler bolts .

4-28