TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 105 of 779

Remove

Install

1. Remove eight self-locking nuts (A), bolts, and clamps

from the right bank injector tubes.

Note .

Space floating clamps, as shown .

2. Loosen but do not remove the four bolts (B) attaching

1. Tighten the four bolts (B) securing injector tube

injector tube clamps to supports.

clamps to supports.

2. Install eight clamps, bolts, and self-locking nuts (A)

on the right bank injector tubes.

Figure 4-42. Removing or installing fuel injector righ t

tube clamps .

4-23