TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 95 of 779
Remove
1. Remove two bolts (A) attaching outer shroud plate.
2. Remove outer shroud plate (B).
Install
1. Position outer shroud plate (B) on turbosupercharger.
2. Install two bolts (A) securing outer shroud plate.
Figure 4-23. Removing or installin g
turbo supercharger outer shroud plate .
Remove
1. Remove grommet (A) from inner shroud plate.
2. Remove elbow (B) from oil inlet hose.
3. Pull oil inlet hose (C) through grommet hole opening
in inner shroud plate.
4. Remove nipple (D).
Install
1. Install nipple (D) in turbosupercharger.
2. Push oil inlet hose (C) through grommet hole opening
in inner shroud plate.
3. Install elbow (B) in oil inlet hose.
4. Install grommet (A) in inner shroud plate.
Figure 4-24. Removing or installing oil inle t
hose, elbow, and nipple .
4-13
Back to Top
