TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 96 of 779
Remove
1. Remove hose clamp (A).
2. Remove generator exhaust
Install
tube cap (B).
Remove
1. Remove two bolts (A), lock washers, and flat washers
securing generator exhaust tube.
2. Tighten hose clamp (A) securing cap on exhaust tube.
1. Position support clamp (B) and support around
Figure 4-25. Removing or installing generato r
generator exhaust tube.
2. Install two bolts (A), lock washers, and flat washers
exhaust tube cap (right side only) .
securing clamp and support to inner shroud plate.
Figure 4-26. Removing or installing generato r
exhaust tube support clamp (right side only) .
4-14
Back to Top
