TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 99 of 779

Figure 4-32. Disconnecting or connectin g

turbosupercharger

at

mounting

base.

Disconnect and remove

1. Remove eight self-locking nuts (A), flat washers, and

cap screws attaching exhaust pipes to turbine housing.

2. Separate exhaust pipes from turbine housing and

remove and discard two gaskets (B).

3. Remote

turbosupercharger

assembly

(C) from

mounting base.

Connect and install

1.

Position

turbosupercharger

assembly

(C) o n

mounting base.

2. Position new gaskets (B) between exhaust pipes and

turbine housing.

3. Install eight cap screws, flat washers, and self-locking

nuts (A) securing exhaust pipes to housing.

Figure 4-33. Disconnecting or connectin g

exhaust pipes at turbine housing an d

removing or installing turbosupercharger .

4-17