TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 86 of 779
1. Remove two self-locking nuts (A).
2. Remove two clamping bars (B).
3. Remove starter retaining “U” bolt (C).
Figure 4-5. Removing starter retainin g
“U” bolt .
1. Cut and remove locking wire (A).
2. Remove four bolts (B) and flat washers securing
starter support to oil pan.
3. Remove starter support and starter cradle as an
assembly (C).
Figure 4-6. Removing starter retaining
and cradle .
Figure 4-7. Removing or installing starte r
mounting nuts using open en d
wrench-5120-678-5288.
4-4
Back to Top
