TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 27 of 779
Figure
Number
6-175
6-176
6-177
6-178
6-179
6-180
6-181
6-182
6-183
6-184
6-185
6-186
6-187
6-188
6-189
6-190
6-191
6-192
6-193
6-194
6-195
6-196
6-197
6-198
6-199a
6-199b
6-199c
6-200
6-201
6-202
6-203
6-204
6-205
6-206
6-207
6-208
6-209
6-210
6-211
6-212
6-213
6-214
Title
Page
Removing advance flyweight adjusting ring and injection pump drive
gearshaft attaching parts (adjusting ring secured with nuts and washers).
6-146
Removing advance flyweight adjusting ring and injection pump drive
gearshaft attaching parts (adjusting ring secured with bolts).
6-146
Removing injection pump drive gearshaft.
6-147
Removing advance flyweight adjusting ring and flyweight.
6-147
Removing flyweight housing.
6-148
Removing advance vane housing and vane.
6-148
Removing or installing injection pump drive gearshaft ball bearing retaining
ring.
6-149
Removing injection pump drive gearshaft ball bearing.
6-149
Removing or installing automatic advance vane, housing, seals, and springs. 6-150
Removing rear bearing support using suitable gear puller.
6-150
Removing accessory drive bevel gearshaft ball bearing using suitable gear
puller.
6-150
Removing advance vane housing cover, gearshaft plug, and retaining ring. 6-151
Rear fan and accessory drive housing and base studding assembly.
6-153
Determining shim thickness for rear fan driven gearshaft and rear fan drive
bevel gearshaft.
6-158
Determining shim thickness for accessory drive bevel gearshaft bearing.
6-159
Pressing bevel gearshaft ball bearing on gearshaft,
6-160
Installing advance vane housing cover on accessory drive bevel gearshaft.
6-160
Pressing drive gearshaft ball bearing on drive gearshaft.
6-161
Installing advance vane housing and vane.
6-161
Installing flyweight housing.
6-162
Installing advance flyweight adjusting ring and flyweight.
6-162
Installing injection pump drive gearshaft.
6-163
Installing advance flyweight adjusting ring and injection pump drive
gearshaft attaching parts (adjusting ring secured with nuts).
6-163
Installing advance flyweight adjusting ring and injection pump drive
gearshaft attaching parts (adjusting ring secured with bolts).
6-164
Test stand assembly - FSN -4910-986-9873.
6-165
Test stand with coupling guard and housing cover removed.
6-166
Test stand heater control and supply tanks.
6-167
Fuel injector advance unit curve.
6-168
Fuel injection pump advance assembly adjusting ring.
6-169
Pressing driven gearshaft ball bearing on spur gearshaft.
6-170
Assembling rear fan and accessory drive housing.
6-171
Installing fuel injection pump splined drive coupler half.
6-172
Installing fuel injection pump diaphragm drive coupler half.
6-172
Installing fuel injection advance bearing cap.
6-173
Removing or installing lifting eye, intercylinder hose flanges, and hoses.
6-174
Removing or installing camshaft drive adapter and associated parts.
6-175
Disassembling or assembling camshaft drive adapter and associated parts 6-175
Removing or installing right camshaft assembly.
6-17 6
Disassembling or assembling camshaft assembly.
6-176
Removing or installing right camshaft end plate.
6-177
Disassembling or assembling
Improvised camshaft trueing
right camshaft cover plate.
6-178
device.
6-179
xxi
Back to Top
