TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 19 of 779
Figure
Number
5-67
5-68
5-69
5-70
5-71
5-72
5-73
5-74
5-75
5-76
5-77
5-78
5-79
5-80
5-81
5-82
5-83
5-84
5-85
5-86
5-87
5-88
5-89
5-90
5-91
5-92
5-93
5-94
5-95
5-96
5-97
5-98
Title
Removing or installing fuel injector tubes at fuel injection pump.
Removing or installing exhaust manifold and exhaust pipe retaining straps.
Removing or installing exhaust manifolds and exhaust pipes - cylinder Nos.
lR,
2R,
and
3R
and cylinder Nos. lL, 2L, and 3L - engines prior to
rerouting of crankcase breather tube.
Removing or installing manifolds and exhaust pipes - cylinder Nos. lR, 2R,
and 3R and cylinder Nos. lL, 2L, and 3L, - engines with rerouted crank-
case breather tube.
Removing or installing fuel return hose and crankcase breather tube tee -
engines prior to rerouting of fuel return hose.
Disconnecting of connecting intermediate crankcase breather tubes at fuel
injection pump clamp.
Removing or installing fuel return hose - engines with rerouted fuel return
hose.
Removing or installing crankcase breather tube tee - engines with rerouted
crankcase breather tube.
Removing or installing breather tube cushioned clamp at rear fan drive
housing - engines with rerouted crankcase breather tube.
Removing or installing fuel inlet hose and crankcase breather tube.
Removing fan drive control valve - engines with fan control valve.
Removing or installing exhaust manifolds and exhaust pipes - cylinder Nos.
4R, 5R, and 6R and cylinder Nos. 4L, 5L, and 6L.
Removing or installing right turbosupercharger mounting base.
Removing or installing right and left turbosupercharger mounting base tie
rod.
Removing or installing right turbosupercharger mounting base support.
Disconnecting or connecting throttle rods at intermediate throttle lever.
Removing or installing intermediate throttle lever support.
Removing or installing fuel injector tube angle brackets.
Disconnecting or connecting fuel injection pump oil inlet hose - engines prior
to rerouting of hose and clamps.
Disconnecting fan clutch oil transfer hose - engines with transfer hose.
Disconnecting or connecting fuel injection pump oil inlet hose - engines with
relocated hose clamps.
Disconnecting or connecting turbosupercharger oil inlet hose - engines prior
to rerouting of hoses and clamps.
Removing or installing fire extinguisher tube - engines prior to new tube and
clamps.
Removing or installing turbosupercharger oil inlet hose and fire extinguisher
tube - engines with new tube and relocated clamps.
Positioning injection pump coupler by turning flywheel using splined wrench
Removing fuel injection pump splined coupler bolts.
Separating fuel injection pump splined coupler sleeves.
Removing fuel injection pump diaphragm coupler bolts.
Separating fuel injection pump diaphragm coupler.
Removing fuel injection pump.
Removing or installing camshaft drive shrouds - right side.
Disconnecting or connecting lower right engine shroud - top view.
Page
5-40
5-40
5-41
5-42
5-43
5-43
5-44
5-44
5-45
5-45
5-46
5-47
5-48
5-48
5-49
5-50
5-50
5-51
5-51
5-51
5-52
5-53
5-54
5-55
5-56
5-56
5-57
5-57
5-57
5-57
5-58
5-58
xiii
Back to Top
