TM-9-2815-200-35
ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
TM-9-2815-200-35 - Page 15 of 779
Figure
Number
4-125
4-126
4-127
4-128
4-129
4-130
4-131
4-132
4-133
4-134
4-135
4-136
4-137
4-138
4-139
4-140
4-141
4-142
4-143
4-144
4-145
4-146
4-147
4-148
4-149
4-150
4-151
4-152
4-153
4-154
4-155
4-156
Title
Removing or installing oil pan sealing thread.
Removing or installing right front upper cover.
Removing or installing right rear upper cover.
Removing or installing oil filler and oil level indicator tube shroud plates-
one piece type oil filler and indicator tubes installation.
Removing or installing oil level indicator tube shroud plate-modified shroud
plate installation.
Removing or installing left front upper cover-modified upper cover in-
stallation.
Disconnecting or connecting oil filler and oil level indicator tube retaining
straps-one piece type oil filler and indicator tubes installation shown.
Oil level indicator and oil filler tube upper shroud-tubes with splash pan
installation installed view.
Disconnecting or connecting fuel drain tubes-tubes with splash pan in-
stallation.
Removing or installing oil level indicator and oil filler and oil level indicator
tube shroud plate bolts-tubes with splash pan installation.
Removing or installing oil level indicator and oil filter tube upper cover-
with splash pan installation.
Oil level indicator tube upper cover plate-relocated oil filler tube modified
installed view.
Oil level indicator tube upper cover plate-relocated oil filler tube installed
view.
Disconnecting or connecting fuel drain tubes-relocated oil filler tube in-
stallation.
Removing or installing oil level indicator tube upper cover plate-located
oil filler tube installation.
Removing or installing oil level indicator upper cover plate-relocated oil
filler tube installation.
Removing or installing left rear upper cover.
Disconnecting or connecting oil cooler hoses-left side.
Removing or installing manifold heater ignition unit-right side.
Disconnecting or connecting oil cooler support beam-right side.
Disconnecting or connecting shroud from top frame-right front side.
Disconnecting or connecting right oil cooler end shroud and upper trans-
mission shroud.
Disconnecting or connecting right rear shroud from top frame.
Removing or installing oil coolers and top frame as an assembly.
Removing or installing top frame retaining brackets.
Disconnecting or connecting fuel injector nozzle holder fuel inlet and return
tubes.
Removing or installing fuel injector nozzle fuel tube adapters.
Loosening fuel injector nozzle and holder retainer using wrench-5120-871-
7198.
Removing or installing fuel injector nozzle and holder assembly.
Removing or installing cylinder head shroud plate.
Disconnecting or connecting inner cylinder air deflector,
Disconnecting or connecting inter cylinder connector flange and valve ad-
justing screw covers.
Page
4-62
4-63
4-63
4-63
4-64
4-64
4-64
4-65
4-65
4-66
4-66
4-66
4-67
4-67
4-68
4-68
4-68
4-69
4-69
4-69
4-70
4-70
4-70
4-71
4-72
4-73
4-73
4-74
4-74
4-75
4-75
4-76
ix
Back to Top
