TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 289 of 779

Install

Note. The crankshaft and connecting rod sling

consists

of

a

cable

and

two

adapters. The adapter with the dowel pin hole

attaches to the crankshaft flywheel flange. The

other adapter attaches to the torsional vibration

damper mounting flange.

1. Install the sling adapter (A) on flywheel flange dowel

pin.

2. Secure adapter to flange with two bolts (B) used to

secure flywheel.

Remove

1. Remove two f lywheel bolts (B) attaching sling adapter

(A) to flywheel.

2. Remove adapter from flywheel flange dowel pin.

Install

1. Install the sling adapter (A) to torsional vibration

damper flange (B) and secure with two vibaration

damper mounting bolts.

Remove

1. Remove two vibration damper mounting bolts at-

taching sling adapter (A) to torsional vibration damper

flange (B).

Figure 5-177. Installing or removing crank -

shaft and connecting rod sling-

4910-795-7955 at crankshaft torsional

vibration damper flange.

Figure 5-176. Installing or removing crank-

shaft and connecting rod sling-

4910-795-7955 at crankshaft flywheel flange.

5-103