TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 308 of 779

Remove

Install

1. Remove four bolts (A) and flat washers attaching

1. Attach a rope sling (B) as shown, with weight equally

crankcase to engine overhaul stand.

balanced, and position crankcase on engine overhaul

2. Attach a rope sling (B) as shown, with weight equally

stand.

balanced, and remove crankcase from stand.

2. Install four bolts (A) and flat washers securing crank-

case to stand.

Figure 6-8. Removing or installing crankcase from engine overhau l

stand using improvised rope sling .

c.

Cleaning .

Thoroughly clean crankcase oil passages (fig. 6 -

(1) Refer to paragraph 6-2b for genera l

9) using compressed air and brass wire probes .

instruction s

o n

cleanin g

the crankcase .

6-14