TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 128 of 856
REMOVAL
1.
Remove oil gauge rod (Figure 1, Item 6) from tube assembly (Figure 1, Item 4).
2.
Unscrew tube assembly (Figure 1, Item 4) from adaptor (Figure 1, Item 5) in front right side of oil pan.
3.
Remove locknut (Figure 1, Item 1), clip (Figure 1, Item 2), and tube assembly (Figure 1, Item 4) from right
front exhaust manifold stud (Figure 1, Item 3). Replace locknut on stud. If necessary, remove clip from
tube assembly.
4.
Remove adaptor (Figure 1, Item 5) from oil pan.
6
4
3
5
2
1
MAINT_043
Figure 1.
Oil Level Gauge Rod Removal and Installation (Models 5063-5393 and 5063-539L).
END OF TASK
INSTALLATION
1.
Install adaptor (Figure 1, Item 5) in right side of oil pan.
2.
If removed, install clip (Figure 1, Item 2) on tube assembly (Figure 1, Item 4). Loosely install tube assembly
in adaptor (Figure 1, Item 5).
3.
Remove locknut (Figure 1, Item 1) from right front exhaust manifold stud (Figure 1, Item 3). Discard locknut.
Install clip (Figure 1, Item 2), tube assembly (Figure 1, Item 4), and new locknut (Figure 1, Item 1) onto
exhaust manifold stud (Figure 1, Item 3). Securely tighten tube assembly to adaptor (Figure 1, Item 5).
Torque locknut to 30–35 lb-ft (41–47 N·m).
4.
Install oil gauge rod (Figure 1, Item 6) in tube assembly (Figure 1, Item 4).
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0016
0016-2
Back to Top
