TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 120 of 856

REMOVAL

1.

Remove oil gauge rod (Figure 1, Item 1) from tube assembly (Figure 1, Item 8).

2.

Unscrew tube assembly (Figure 1, Item 8) from adaptor (Figure 1, Item 7) in left side of oil pan.

3.

Remove screw (Figure 1, Item 9), lockwasher (Figure 1, Item 6), nut (Figure 1, Item 5), clip

(Figure 1, Item 10), and tube assembly (Figure 1, Item 8) from bracket (Figure 1, Item 2) on flywheel

housing. If necessary, remove clip from tube assembly (Figure 1, Item 8). Discard lockwasher.

4.

Remove two screws (Figure 1, Item 4), two lockwashers (Figure 1, Item 3), and bracket (Figure 1, Item 2)

from left side of flywheel housing. Discard lockwashers.

1

2

5

6

4

3

7

8

9

10

3

MAINT_040

Figure 1.

Oil Level Gauge Rod Removal and Installation.

END OF TASK

TM 9-2815-205-24

0014

0014-2