INSTALLATION - Continued
4.
For all models except 5063-5393 and 5063-539L, slide hose (Figure 3, Item 2) and two hose clamps
(Figure 3, Item 3), on coolant pump (Figure 3, Item 8), onto water by-pass tube (Figure 3, Item 1). Tighten
clamps securely.
5.
Install two drive belts (Figure 3, Item 6) on left camshaft pulley (Figure 3, Item 16) and coolant pump pulley
(Figure 3, Item 15).
6.
Install idler pulley assembly (Figure 3, Item 7), two flat washers (Figure 3, Item 4), and two screws
(Figure 3, Item 5).
7.
If necessary, connect the fuel line, routed across the front of the coolant pump, to the fuel junction block
(WP 0011).
16
1
2
3
4
5
5
6
4
7
15
8
MAINT_029
Figure 3.
Coolant Pump Idler Pulley and Drive Belt Installation.
END OF TASK
TM 9-2815-205-24
0013
0013-4