TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 125 of 856

INSTALLATION

1.

If removed, install clip (Figure 1, Item 7) on tube assembly (Figure 1, Item 2). Loosely install tube assembly

in adaptor (Figure 1, Item 3).

NOTE

Bolt (Figure 1, Item 6) may already be installed, in right side of flywheel housing, to

accommodate the torque sequence when installing the flywheel housing to the cylinder

block. Remove as required for clip installation.

2.

Install flat washer (Figure 1, Item 4), new lockwasher (Figure 1, Item 5), and bolt (Figure 1, Item 6) through

clip (Figure 1, Item 7). Torque bolt to 30–35 lb-ft (41–47 N·m).

3.

Tighten connection at adaptor (Figure 1, Item 3) and tube assembly (Figure 1, Item 2).

4.

Install oil gauge rod (Figure 1, Item 1) in tube assembly (Figure 1, Item 2).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0015

0015-3/blank