TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 115 of 856

INSTALLATION

NOTE

For models 5063-5393 and 5063-539L, water by-pass hose and two clamps will be

installed in (WP 0011).

1.

Slide hose (Figure 2, Item 2) and two clamps (Figure 2, Item 3) onto coolant pump (Figure 2, Item 8).

2.

Position new coolant pump gasket (Figure 2, Item 13) to oil cooler (Figure 2, Item 14).

NOTE

For model 5063-5393, it will be necessary to install fuel line clamp under screw at front

lower position when mounting coolant pump to oil cooler.

3.

Install coolant pump (Figure 2, Item 8), four flat washers (Figure 2, Item 12), four new lockwashers

(Figure 2, Item 11), four screws (Figure 2, Item 10), and socket head screw (Figure 2, Item 9) on oil cooler

(Figure 2, Item 14). Torque socket head screw and four screws to 13–17 lb-ft (18–23 N·m).

3

2

3

8

9

10

11

12

13

14

MAINT_028

Figure 2.

Coolant Pump Removal.

TM 9-2815-205-24

0013

0013-3