TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 110 of 856

REMOVAL

1.

On model 5063-5393, disconnect fuel hose (Figure 1, Item 1) from elbow (Figure 1, Item 2) on fuel junction

block (Figure 1, Item 9).

2.

Disconnect fuel hose (Figure 1, Item 7) from adaptor (Figure 1, Item 8) at tee fitting (Figure 1, Item 3) in fuel

junction block (Figure 1, Item 9).

3.

Disconnect and remove fuel hose (Figure 1, Item 7) from elbow (Figure 1, Item 6).

4.

Remove transducer (Figure 1, Item 5) from elbow (Figure 1, Item 4) on fuel junction block (Figure 1, Item 9).

5.

Remove adaptor (Figure 1, Item 8) and elbow (Figure 1, Item 4) from tee fitting (Figure 1, Item 3).

*1

*2

3

4

5

6

7

8

9

MODEL

*5063-5393

MAINT_026

Figure 1.

Fuel Injection Box and Lines Removal and Installation (1 of 2).

NOTE

Model 5063-539L has no elbow at top of junction block.

6.

Remove elbows (Figure 2, Items 2 and 15) and tee (Figure 2, Item 3) from fuel junction block

(Figure 2, Item 9).

7.

Remove two screws (Figure 2, Item 13), two lockwashers (Figure 2, Item 11), fuel junction block

(Figure 2, Item 9), and two nuts (Figure 2, Item 10) from bracket (Figure 2, Item 12). Discard lockwashers.

NOTE

Model 5063-539L has two plugs.

8.

If necessary, remove plug (Figure 2, Item 14) from fuel junction block (Figure 2, Item 9).

TM 9-2815-205-24

0012

0012-2