TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 135 of 856

FIELD MAINTENANCE

OIL FILTER ASSEMBLY AND ADAPTOR REPLACEMENT

(MODELS 5063-5393, 5063-539L)

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's

(WP 0104, Table 1, Item 113)

Wrench, Oil Filter

(WP 0104, Table 1, Item 118)

Wrench, Torque, Dial, 0–175 Lb-Ft

(WP 0104, Table 1, Item 120)

Materials/Parts

Cleaning Solvent (WP 0103, Table 1, Item 8)

Materials/Parts (cont.)

Filter Element, Fluid

(WP 0105, Table 1, Item 163)

Gasket (WP 0105, Table 1, Item 34)

Oil, Engine SAE 15/40

(WP 0103, Table 1, Item 27)

Washer, Lock

Qty: (4) (WP 0105, Table 1, Item 23)

REMOVAL

1.

Disconnect turbocharger oil supply hose (Figure 1, Item 1) from elbow (Figure 1, Item 8) in oil filter and

adaptor assembly (Figure 1, Item 3).

2.

If necessary, remove elbow (Figure 1, Item 8) from oil filter and adaptor assembly (Figure 1, Item 3).

3.

Remove two short screws (Figure 1, Item 5), two long screws (Figure 1, Item 4), four lockwashers

(Figure 1, Item 6), four flat washers (Figure 1, Item 7), gasket (Figure 1, Item 2), and oil filter and adaptor

assembly (Figure 1, Item 3) from rear left side of cylinder block. Discard lockwashers and gasket.

1

8

2

3

4

5

6

7

6

7

MAINT_046

Figure 1.

Oil Filter Assembly Removal.

END OF TASK

TM 9-2815-205-24

0019

0019-1