TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 138 of 856
INSTALLATION
1.
Install new gasket (Figure 3, Item 2), oil filter and adaptor assembly (Figure 3, Item 3), four flat washers
(Figure 3, Item 7), four new lockwashers (Figure 3, Item 6), two short screws (Figure 3, Item 5), and two
long screws (Figure 3, Item 4) on rear left side of cylinder block. Torque screws to 30–35 lb-ft (41–47 N·m).
2.
If removed, install elbow (Figure 3, Item 8) in oil filter and adaptor assembly (Figure 3, Item 3).
3.
Connect turbocharger oil supply hose (Figure 3, Item 1) to elbow (Figure 3, Item 8) in oil filter and adaptor
assembly (Figure 3, Item 3). Tighten hose connection securely.
1
8
2
3
4
5
6
7
6
7
MAINT_046
Figure 3.
Oil Filter Assembly Installation.
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0019
0019-4
Back to Top
