TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 35 of 596
TM 9-2815-205-34
2-3. CONTAINER TOP REMOVAL/INSTALLATION
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
AH
1
Seal (App F, Item 165) (models
5063-5299, 5063-5392, 5063-5393, and
TOOLS AND SPECIAL TOOLS
5063-539L)
1
Seal (App F, Item 164) (models
Tool set, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
5063-5395, 5063-5398, and 5063-539F)
MATERIALS/PARTS
EXPENDABLE/DURABLE SUPPLIES
1
Seal (App F, Item 166) (model 5063-5299)
Desiccant (App C, Item 12)
PERSONNEL REQUIRED:
2
a. Removal
Wear safety glasses and stand
clear of air release ports when
purging air from container. Make
certain air pressure is fully
vented before disassembly. ln-
jury to eyes and inner ears can re-
sult from failure to properly vent
container before disassembly.
(1) Press relief valve (1) to release pressure
in shipping container.
NOTE
●
Container (NSN 8145-00-138-
7809) for model 5063-5299 uses
twenty screws, no flat washers, and
twenty nuts.
●
Container (NSN 2815-01-232-
9447) for models 5063-5299,
5063-5392,
5063-5393,
and
5063-539L
uses
twenty-four
screws, twenty-four flat washers,
and twenty-four nuts.
●
Container for models 5063-5395,
5063-5398, and 5063-539F, uses
forty screws, forty flat washers, and
forty nuts.
(2) Remove screws (2), flat washers (3), and
nuts (4) from shipping container,
2-8
Change 1
Back to Top
