TM 9-2815-205-34
(4) Loosen four hose clamps (17) on two hoses (18) on tube (11) between water pump (19) and
transmission cooler top (3). Slide clamps and hoses onto tube and remove tube. Remove
hoses and clamps from tube.
(5)
(6)
(7)
Remove eight screws (20), eight Iockwashers (21), and eight flat washers (22) from bottom of
transmission oil cooler bracket (23). Discard Iockwashers.
Transmission cooler Is heavy. Provide adequate
personnel from cooler falling during removal.
support to prevent injury to
Loosen two screws (24), two Iockwashers (25), and two flat washers (26) securing bracket (27)
to transmission oil cooler assembly (3). Remove transmission oil cooler assembly and gasket
(28). Discard gasket.
Remove hose (2) and two clamps (1) from water outlet housing (4).
2-13