TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 44 of 596
TM 9-2815-205-34
b. Installation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Install two screws (11), fuel junction block (3), two Iockwashers (12), and two nuts (13) on
bracket (14). Torque screws to 30-35 Ib-ft (41-47 N•m).
NOTE
Model 5063-539L has two plugs in junction block.
If removed, install plug (15) in fuel junction block (3).
Install tee fitting (6) in top of fuel junction block (3).
NOTE
Model 5063-539L has no elbow on top of junction block.
On model 5063-5393, install elbow (2) in top of fuel junction block (3) and elbow (10) in side of
junction block.
Install elbow (9) in top of tee fitting (6) and adaptor (5) in side of tee fitting.
Connect fuel hose (4) to adaptor (5) on fuel junction block (3) and to elbow (7). Tighten hose
connection.
Install transducer (8) in elbow (9) on fuel junction block (3).
On model 5063-5393, connect fuel hose (1) to elbow (2) in fuel junction block (3). Tighten hose
connection.
END OF TASK
Change 1
2-17
Back to Top
