TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 51 of 596

TM 9-2815-205-34
2-9. OIL LEVEL
This task covers:
GAGE ROD
a. Removal
REMOVAL/INSTALLATION (MODELS 5063-5393 AND 5063-539L)
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5393 5063-539L
1
Nut, self-locking (App F, Item 106)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Torque wrench (App B, Item 116)
a. Removal
(1) Remove oil gage rod (1) from tube
assembly (2).
(2) Unscrew tube assembly (2) from adaptor
(3) in front right side of oil pan,
(3) Remove self-locking nut (4), clip (5), and
tube assembly (2) from right front exhaust
manifold stud (6). Replace nut on stud. If
necessary, remove clip from tube
assembly.
(4) Remove adaptor (3) from oil pan.
b. Installation
(1)
(2)
(3)
(4)
Install adaptor (3) in right side of oil pan.
If removed, install clip (5) on tube
assembly (2). Loosely install tube
assembly in adaptor (3).
Remove self-locking nut (4) from right front
exhaust manifold stud. Discard nut. Install
clip (5), tube assembly (2), and nut.
Securely tighten tube assembly to adaptor
(3). Torque nut to 30-35 Ib-ft (41-47 N•m).
Install oil gage rod (1) in tube assembly
(2).
END OF TASK
2-24
Change 1


Back to Top