TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 60 of 596
TM 9-2815-205-34
(6) Mall upper screw (14), bracket (8), four flat washers (17), two Iockwashers (16), and two nuts
(15) on flywheel housing (18) and in-place screw (14). Loosely tighten screws.
(7) Install two spacers (12), two flat washers (11), two Iockwashers (10), and two small screws (9)
’
in bracket (8) at oil cooler (13). Torque two small screws (9) to 13-17 Ib-ft (18-23 N-m). Torque
two large screws (14) to 35-39 Ib-ft (47-53 N·m).
(8) Install four screws (4), oil filter assembly (3), four flat washers (5), four Iockwashers (6), and
four nuts (7) on bracket (8). Torque screws to 30-35 Ib-ft (41-47 N·m).
(9) Connect two hose assemblies (1) to two elbows (2) in oil filter assembly (3). Tighten securely.
END OF TASK
2-33
Back to Top
