TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 69 of 596
TM 9-2815-205-34
2-18. ENGINE OIL COOLER REMOVAL/INSTALLATION (MODELS 5063-5393 AND 5063-539L)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
EXPENDABLE/DURABLE SUPPLIES
5063-5393 5063-539L
2
Studs (App C, Item 53)
TOOLS AND SPECIAL TOOLS
EQUIPMENT CONDITION
Tool kit, general mechanics (App B, Item 107)
Para
Wrench, torque (App B, Item 116)
2-4
2-6
MATERIALS/PARTS
2-5
2
Lockwashers (App F, Item 99)
2-13
13
Lockwashers (App F, Item 98)
1
Gasket (App F, Item 34)
1
Gasket (App F, Item 33)
1
Gasket (App F, Item 31)
1
Gasket (App F, Item 41)
Description
Transmission oil cooler removed.
Coolant pump removed.
Fuel junction block removed.
Oil filter assembly and adaptor removed.
a. Removal
(1)
(2)
(3)
(4)
Loosen two hose clamps (1) and slide hose (2) down onto oil cooler assembly (3).
Remove two bolts (4) through clip (5), two Iockwashers (6), elbow (7), and gasket (8) from
cylinder block, Discard gasket and Iockwashers.
Remove hose (2) and two clamps (1) from
oil cooler assembly (3).
If necessary, remove pipe plug (9)
from elbow (7).
(2-41 blank)/2-42
Change 1
Back to Top
