TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 70 of 596
TM 9-2815-205-34
(5) Remove two bolts (10), two Iockwashers (11), two flat washers (12), and bracket (13) from
transmission oil cooler bracket (14). Discard Iockwashers.
(6) Remove five screws (15), five Iockwashers (16), five flat washers (17), and transmission oil
cooler bracket (14) from oil cooler assembly (3). Discard Iockwashers.
Support oil cooler assembly during removal. Cooler element is fragile and damage can
result from dropping.
(7) Remove three bolts (18) through clip (19), three Iockwashers (20), three flat washers (21), and
oil cooler assembly (3) from cylinder block. Discard Iockwashers.
(8) Remove gasket (22), oil cooler element (23), and gasket (24) from oil cooler housing (25).
Discard gaskets.
(9) Remove two large screws (26), two Iockwashers (27), two flat washers (28), small bolt (29),
Iockwasher (30), flat washer (31), oil cooler adaptor (32), and gasket (33) from cylinder block.
Discard gasket and Iockwashers.
2-43
Back to Top
