TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 79 of 596
2-20. FUEL FILTERS AND MOUNTING BRACKET REMOVAL/INSTALLATION (MODEL 5063-5392)
(Cont)
b. Installation
(1) Install filter mounting bracket (15), two flat washers (21), two Iockwashers (20), two long screws
(19) (into side of flywheel housing), two flat washers (18), two Iockwashers (17), and two short
screws (16) (into top of flywheel housing). Torque screws (19) to 71-75 Ib-ft (96-102 N·m) and
screws 16 to 30-35 Ib-ft (41-47 N·m).
NOT E
If two screws (11) in upper section of fuel filter assembly have been removed, remove
the lower canister to install screws due to interference (Para 2-37).
(2) Install two screws (11), fuel filter assembly (6), fuel strainer assembly (3), two flat washers (14),
two Iockwashers (13), and two nuts (12) on filter mounting bracket (15). Torque nuts to 30-35
Ib-ft (41-47 N·m).
2-52
TM 9-2815-205-34
Back to Top
