TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 73 of 596

TM 9-2815-205-34
2-19. ENGINE OIL COOLER REMOVAL/INSTALLATION (MODELS 5063-5395,5063-5398, AND
5063-539F)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
5063-5395 5063-5398 5063-539F
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
MATERIALS/PARTS
4
Lockwashers (App F, Item 99)
8
Lockwashers (App F, Item 98)
1
Gasket (App F, Item 66) (model
5063-5398)
1
Gasket (App F, Item 80) (models
5063-5395 and 5063-539F)
MATERIALS/PARTS (Cont)
1
Gasket (App F, Item 41) (models
5063-5395 and 5063-539F)
1
Seal ring (App F, Item 159) (model
5063-5398)
1
Gasket (App F, Item 48)
1
Gasket (App F, Item 28)
EQUIPMENT CONDITION
Para Description
2-6 Coolant pump removed.
2-14 Oil filter mounting bracket removed
(models 5063-5395 and 5063-539F)
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
For models 5063-5395 and 5063-539F, loosen two clamps (1) and slide hose (2) down onto oil
cooler housing (3).
For models 5063-5395 and 5063-539F, remove two bolts (4) securing clip (5), two Iockwashers
(6), elbow (7), and gasket (8) from cylinder block. Discard gasket and Iockwashers.
For model 5063-5398, remove two bolts (4) securing clip (5) and two Iockwashers (6) from
flange (9) on cylinder block. Discard Iockwashers.
Remove two bolts (10), two Iockwashers (11), two flat washers (12), elbow (13), and gasket
(14) from oil cooler housing (3). Discard gasket and Iockwashers.
Remove three bolts (15), three Iockwashers (16), and three flat washers (17) from oil cooler
housing (3). Discard Iockwashers.
Oil cooler is heavy. Provide adequate support to prevent injury to personnel
from cooler falling during removal.
Support oil cooler housing (3) and remove three nuts (18), three Iockwashers (19), and three
flat washers (20) from three studs (21) in oil cooler housing. Remove oil cooler assembly from
cylinder block. Discard Iockwashers.
2-46
WARNING


Back to Top