TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 65 of 596
TM 9-2815-205-34
2-17. ENGINE/TRANSMISSION OIL COOLER REMOVAL/INSTALLATION (MODEL 5063-5392)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
5063-5392
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
MATERIALS/PARTS (Cont)
1
Gasket (App F, Item 41)
1
Gasket (App F, Item 34)
1
Gasket App F, Item 33)
1
Gasket App F, Item 31)
EQUIPMENT CONDITION
MATERIALS/PARTS
2
Lockwashers (App F, Item 99)
13
Lockwashers (App F, Item 98)
Para Description
2-6 Coolant pump removed.
2-12 Oil filter adaptor removed.
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
2-38
Loosen two hose clamps (1) and slide
hose (2) down onto oil cooler assembly
(3).
Remove two bolts (4) through clip (5),
two Iockwashers (6), elbow (7), and
gasket (8) from cylinder block. Discard
gasket and Iockwashers. If necessary,
remove clip (5) from air box heater fuel
line.
Remove hose (2) and two clamps (1)
from oil cooler assembly (3).
If necessary, remove pipe plug (9) from
elbow (7).
Remove two short bolts (10), four long
bolts (11), six Iockwashers (12), and six
flat washers (13) from oil cooler
assembly (3) and clip (14). Discard
Iockwashers.
Remove four nuts (15), four Iockwashers
(16), and four flat washers (17) from oil
cooler assembly (3). Discard
lockwashers.
Back to Top
