TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 64 of 596
(4)
(5)
(6)
(7)
(8)
(9)
TM 9-2815-205-34
Install three flat washers (18), three Iockwashers (17), and three bolts (16) in oil
assembly (14). Torque bolts to 13-17 Ib-ft (18-23 N·m).
Remove two guide studs (15) and install five flat washers 13), five Iockwashers
bolts (11) in oil cooler assembly (14). Torque bolts to 13-17 Ib-ft (18-23 N·m).
If removed, install pipe plug (10) in elbow (3).
cooler
(12), and five
Slide hose (2) and two clamps (1) onto oil cooler assembly (14).
Slide elbow (3) into hose (2) and install gasket (9), elbow (3), two flat washers (8), two
Iockwashers (7), Iong bolt (4) through clip (5) on hose (22), and short bolt (6) on cylinder block.
Torque bolts to 13-17 Ib-ft (18-23 N·m).
Adjust hose (2) and two clamps (1) between elbow (3) and oil cooler assembly (14) with clamp
adjusting screws facing front of engine. Tighten clamps securely.
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
2-6 Install coolant pump.
2-37
Back to Top
