TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 54 of 596
TM 9-2815-205-34
2-11. OIL FILTER ADAPTOR REMOVAL/INSTALLATION (MODEL 5063-5299)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5299
4
Lockwashers (App F, Item 99)
1
Gasket (App F, Item 60)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1) Remove four screws (1), four Iockwashers (2), and four flat washers (3) from oil filter adaptor
(4) on rear left cylinder block. Discard Iockwashers.
(2) Using a soft head hammer, tap the oil filter adaptor (4) and remove adaptor and gasket (5).
Discard gasket.
(3) If engine is out of container, remove bolt (6) and flat washer (7) from flywheel housing.
b. Installation
(1) If engine is out of container, install bolt (6) and fiat washer (7) in flywheel housing at eight
o’clock position.
.
(2) Install gasket (5), oil filter adaptor (4), four flat washers (3), four Iockwashers (2), and four
screws (1) on rear left side of cylinder block. Torque screws to 30-35 Ib-ft (41-47 N·m).
END OF TASK
2-27
Back to Top
